Home > Vertical RJ45 Jack >

LPJD4011DNL4 IR Reflow Vertical RJ45 Jack With 10/100Base-T Magnetics

Product Categories

RJ45 Modular Jack [1850]
Magnetic RJ45 Jack [1948]
Low Profile RJ45 Jack [97]
PoE RJ45 Connector [322]
Vertical RJ45 Jack [346]
SMT RJ45 Connector [121]
RJ45 Multi Port Jack [1034]
Optical Transceivers [336]
PoE LAN Transformer [213]
Discrete Magnetic Transformers [1189]
SFP Cage Connector [448]
QSFP Cage [338]
Circular Connectors [12]
LINK-PP Magjacks [5]
LINK-PP Modjacks [3]
LINK-PP Magnetics [3]
LINK-PP Transceivers [1]

LINK-PP INT'L TECHNOLOGY CO., LIMITED

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

LPJD4011DNL4 IR Reflow Vertical RJ45 Jack With 10/100Base-T Magnetics

Name: LPJD4011DNL4 IR Reflow Vertical RJ45 Jack With 10100BaseT Magnetics
Brand: LINK-PP
Price: 0.09 USD

LPJD4011DNL4 IR Reflow Vertical RJ45 Jack With 10/100Base-T Magnetics Manufactures

Brand Name : LINK-PP

Model Number : LPJD4011DNL4

Certification : REACH, RoHS, FCC

Place of Origin : Guangdong, Huizhou

MOQ : 1

Price : $0.09-$0.6

Payment Terms : T/T, L/C, CAD / D/P, OA

Supply Ability : 3000 in Stock

Delivery Time : 1-3days

Packaging Details : Tray, Tape & Reel

Series : Vertical RJ45 Magnetic Jack

RoHS Compliant : Yes

Data Rate : 10/100 Mbps

Number of Ports : 1x1 (Single Port)

Mounting : THT

Solder : IR Reflow

Orientation : Top-entry

PART NO. : LPJD4011DNL4

Contact Now

LPJD4011DNL4 THR Vertical RJ45 Connector Overview

LPJD4011DNL4 is a vertical RJ45 connector developed by LINK-PP INT'L TECHNOLOGY CO., LIMITED, which is essentially positioned as a Through-Hole Reflow (THR) connector with 10/100 magnetic components. It is adapted to Ethernet scenarios, supporting 10/100 Base-T transmission rate, and adopts a 1x1 port design. The contact configuration is 8P8C (complying with the RJ45 Ethernet interface standard), and it is a non-PoE (Power over Ethernet) type. The port has 4 built-in magnetic cores, and the PCB mounting angle is a top-entry type, which can meet the interface requirements of conventional local area network (LAN) devices.

LPJD4011DNL4 Electrical Specifications

Parameter	Specification	Test Condition / Notes
Turn Ratio	1CT:1CT ±5%	Tested @ 25℃
Open Circuit Inductance (OCL)	Min. 350uH	@ 25℃, 100KHz frequency, 0.1V voltage, 8mA DC Bias
Insertion Loss	Max. -1.2 dB	Frequency range: 1-100MHz; Tested @ 25℃
Return Loss	- Min. -16 dB (1-30MHz) - Min. -12 dB (30-60MHz) - Min. -10 dB (60-80MHz) - Min. -8 dB (80-100MHz)	Tested @ 25℃; Dual specification repetition for 1-30MHz and 80-100MHz per original document
Cross Talk	Min. -30 dB	Frequency range: 1-100MHz; Tested @ 25℃
Common Mode Rejection Ratio (CMRR)	Min. -30 dB	Frequency range: 1-100MHz; Tested @ 25℃
Isolation (PHY SIDE To Line SIDE)	1500Vrms	Isolation between physical layer side and line side; Tested @ 25℃
Operating Temperature Range	-40℃ ~ +85℃	No additional test voltage/frequency conditions specified

THR Reflow Specifications:

Preheat Stage: Temperature range (TA-TB): 150-200°C; Time range (T1-T2): 60-180 seconds.
Holding Temperature Stage: Holding temperature: 217°C; Holding time (TL): 60-150 seconds.
Peak Temperature Stage: Maximum peak temperature (TP): 250 (+0/-5) °C; Maximum time at peak temperature (TP): 5 seconds.
Additional Requirements: The maximum average heating rate is 3°C/s; the maximum average cooling rate is 6°C/s. The maximum time from 25°C to the product exiting the furnace is 6 minutes.

LPJD4011DNL4 IR Reflow Vertical RJ45 Jack With 10/100Base-T Magnetics

Mechanical & Material Characteristics

Material Composition

Housing: Made of thermoplastic material PA46 + 30% glass fiber (G.F.), complying with the UL94V-0 flammability rating, and featuring both mechanical strength and fire safety.
Contact: Made of phosphor bronze C5210R-EH with a thickness of 0.35 mm. The contact area is gold-plated, with a minimum gold plating thickness of 6 micro-inches, enhancing electrical conductivity and oxidation resistance.
Pins: Made of brass C2680R-H with a thickness of 0.35 mm, ensuring the rigidity and electrical conductivity of the pins.
Shield: Made of stainless steel SUS 304-1/2H with a thickness of 0.2 mm, which can effectively shield external electromagnetic interference (EMI).

Dimensions & Layout

Dimensional Tolerance: The dimensional tolerances for different precision requirements are ±0.30 mm, ±0.25 mm, and ±0.15 mm, respectively, with an angle tolerance of ±1°. The unit is uniformly mm, the drawing scale is 2/1, and there are 3 drawing sheets.

Recommended PCB Layout: The product provides a recommended PCB layout (Top View) to guide the design of the PCB board matching the connector, ensuring proper installation and signal transmission performance.

LPJD4011DNL4 IR Reflow Vertical RJ45 Jack With 10/100Base-T Magnetics

Product Tags: